A032 3-Position Compact Rotary Actuator

Overview

The A032 3-position actuator has an auxiliary body that houses two pistons with limit rods that provide a positive stop at the actuator's middle position with near-zero lash. Depending on the combination of pressurized and exhausted ports, the actuator can reach any of its 3 positions from any other position in any desired sequence. Like its two-position counterpart, the A032, it fits in the palm of your hand.

Specifications:

• 3-Position Compact Rotary Actuator
• Bore Size = 5/8"
• Standard Rotations = 45-0-45, 50-0-50, 90-0-90, 95-0-95 degrees
• Shaft sizes = Standard: .375" dia. & R .375" dia., Options: D .375" dia., .250" dia., R .250" dia., 8mm, & D 8mm 
• Torque at 80 psi = Toward End Positions: 9 in-lbs., Toward Center Position: 4.5 in-lbs.
• Ball Bearing Ratings - Radial: 305 lbs., Axial: 76 lbs.
• Port Size = 10-32 
• Available Options:
  • Adjustable Rotation 
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Fluorocarbon Seals

See the A032 3-Position Compact Rotary Actuator Part Number page for detailed configuration and option information.

For higher torque and larger rotation angles, consider our A12 3-Position Compact Rotary Actuator.

 Compare All 3-Position Rotary Actuators

A12 3-Position Rotary Actuator

Overview

With internal stops for an intermediate position, our A12 three-position actuator has overall dimensions that are similar to those of its two-position counterpart, the A12 rotary actuator. Output torque is that of a single rack unit but it can rotate to any of its 3 positions in any sequence by simply activating the proper directional control valve.

Specifications:

• 3-Position Rotary Actuator
• Bore Size = 5/8"
• Standard Rotations = From 30 to 730 total
• Shaft Sizes = Standard: .375" dia., Options: .250" dia., D .375" dia., & HS .375" I.D.
• Torque at 80 psi = 12 in-lbs.
• Ball Bearing Ratings = Radial: 305 lbs., Axial: 76 lbs.
• Port Size = 10-32 or 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Hollow Shaft
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A12 3-Position Rotary Actuator Part Numberpage for detailed configuration and option information.

But if you're looking for precise unidirectional sequential steps, consider our X1 Indexing Actuator.

For increased torque output, consider the A22 3-Position Actuator.

Compare All 3-Position Rotary Actuators

A22 3-Position Rotary Actuator

Overview

With internal stops for an intermediate position, our A22 three-position actuator has overall dimensions that are similar to those of its two-position counterpart, the A22 Rotary Actuator. Output torque is that of a single rack unit but it can rotate to any of its 3 positions in any sequence by simply activating the proper directional control valve.

Specifications:

• 3-Position Rotary Actuator
• Bore Size = 1"
• Standard Rotations = From 30 to 730 degrees total
• Shaft Sizes = Standard: .500" dia., Options: D .500" dia. & HS .375" I.D.
• Torque at 80 psi = 39 in-lbs.
• Ball Bearing Ratings = Radial: 1,030 lbs., Axial: 257 lbs.
• Port Size = 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A22 3-Position Rotary Actuator Part Numberpage for detailed configuration and option information.

But if you're looking for precise unidirectional sequential steps, consider our X2 Indexing Actuator.

For increased torque output, consider the A32 3-Position Actuator.

Compare All 3-Position Rotary Actuators

A32 3-Position Rotary Actuator

Overview

With internal stops for an intermediate position, our A32 three-position actuator has overall dimensions that are similar to those of its two-position counterpart, the A32 rotary actuator. Output torque is that of a single rack unit but it can rotate to any of its 3 positions in any direction, in any sequence by simply activating the proper directional control valve.

Specifications:

• 3-Position Rotary Actuator
• Bore Size = 1 3/8"
• Standard Rotations = From 30 to 730 degrees total
• Shaft Sizes = Standard: .750" dia., Options: D .750" dia., HS .750" I.D., & HS .625" I.D.
• Torque at 80 psi = 119 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Washdown Protection
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A32 3-Position Rotary Actuator Part Number page for detailed configuration and option information.

But if you're looking for precise unidirectional sequential steps, consider our X3 Indexing Actuator.

For increased torque output, consider the A42 3-Position Actuator.

Compare All 3-Position Rotary Actuators

A42 3-Position Rotary Actuator

Overview

With over 30 times more torque capacity than our A032 3-Position Actuator and billions of standard possible configurations, our A42 three-position actuator has overall dimensions that are similar to those of its two-position counterpart, the A42 Rotary Actuator. Output torque is that of a single rack unit but it can rotate to any of its 3 positions in any sequence by simply activating the proper directional control valve.

Specifications:

• 3-Position Rotary Actuator
• Bore Size = 2"
• Standard Rotations = From 30 to 730 degrees toal
• Shaft Sizes = Standard: 1.000" dia. or 1.125" dia., Options: D 1.000" dia., D 1.125" dia., & HS .750" I.D.
• Torque at 80 psi = 277 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A42 3-Position Rotary Actuator Part Number page for detailed configuration and option information.

But if you're looking for precise unidirectional sequential steps, consider our X4 Indexing Actuator.

Compare All 3-Position Rotary Actuators