PA01 Pick & Place Actuator

Overview

The PA01 pick & place actuator features a rotary section similar to our A01 Rotary Actuator coupled with a linear cylinder to produce independently controlled linear and rotary motion of the rod. With standard linear strokes up to 6 inches, optional rod ends, and tie rod construction with aluminum cylinders, the PA01 is an extremely versatile actuator, full with capabilities in a very small package.

Specifications:

• Bore Size = 5/8"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .375" dia., Options: None
• Torque at 80 psi = 5 in-lbs. @ extended, 6 in-lbs. @ retracted
• Linear Force at 80 psi = Extended: 25 lbs., Retract: 15 lbs.
• Port Size = 10-32
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Flow Controls
  • Mount Plates
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the PA01 Pick & Place Actuator Part Number page for detailed configuration and option information.

If you need more torque, consider our PA2 Pick & Place Actuator.

Compare All Pick & Place Actuators