A01 Rotary Actuator

Overview

The A01 is the smallest in the Rotomation tie rod actuator family but shares many of the same construction features and options as its bigger counterparts. It is very rugged and extremely flexible, with nearly a billion standard configurations, each of which can be assembled to order and typically ship within a few days. The A01 has been tested to more than 20 million maintenance-free duty cycles.

Specifications:

• Bore Size = 5/8"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft sizes = Standard: .250" dia., Options: .187" dia., & D .250" dia. 
• Torque at 80 psi = 6 in-lbs.
• Ball Bearing Ratings - Radial: 77 lbs., Axial: 19 lbs.
• Port Size = 10-32 or 1/8 NPT
• Available Options:
  • Adjustable Rotation 
  • Cushions 
  • Double Ended Shafts
  • Flow Controls
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Duty Seals
  • Fluorocarbon Seals
  • Flourocarbon Hydraulic Service Seals

See the A01 Rotary Actuator Part Number page for detailed configuration and option information.

For similar torque with an inherent soft, slow start/stop motion, take a look at our AL75 Compact Rotary Actuator.

If you need more torque, consider our A1 Tie Rod Rotary Actuator. 

Compare All Single Rack Tie Rod Rotary Actuators

A1 Rotary Actuator

Overview

The A1 rotary actuator can be specified in nearly two billion standard configurations that can be assembled to order and typically ship within a few days. It shares many of the same construction features and options with its bigger counterparts. The A1 has been tested to 20 million maintenance-free duty cycles.

Specifications:

• 2-Position Rotary Actuator
• Bore Size = 5/8"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .375" dia., Options: .250" dia., D .375" dia., & HS .375" I.D.
• Torque at 80 psi = 12 in-lbs.
• Ball Bearing Ratings = Radial: 305 lbs., Axial: 76 lbs.
• Port Size = 10-32 or 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Hollow Shaft
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A1 Rotary Actuator Part Number page for detailed configuration and option information.

Looking for the three-position version, see A12 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X1 Indexing Actuator.

For double the output torque and zero backlash, consider our Dual Rack A12 Rotary Actuator.

Compare All Single Rack Tie Rod Rotary Actuators

A12 3-Position Rotary Actuator

Overview

With internal stops for an intermediate position, our A12 three-position actuator has overall dimensions that are similar to those of its two-position counterpart, the A12 rotary actuator. Output torque is that of a single rack unit but it can rotate to any of its 3 positions in any sequence by simply activating the proper directional control valve.

Specifications:

• 3-Position Rotary Actuator
• Bore Size = 5/8"
• Standard Rotations = From 30 to 730 total
• Shaft Sizes = Standard: .375" dia., Options: .250" dia., D .375" dia., & HS .375" I.D.
• Torque at 80 psi = 12 in-lbs.
• Ball Bearing Ratings = Radial: 305 lbs., Axial: 76 lbs.
• Port Size = 10-32 or 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Hollow Shaft
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A12 3-Position Rotary Actuator Part Numberpage for detailed configuration and option information.

But if you're looking for precise unidirectional sequential steps, consider our X1 Indexing Actuator.

For increased torque output, consider the A22 3-Position Actuator.

Compare All 3-Position Rotary Actuators

A12 Rotary Actuator

Overview

The A12 rotary actuator can be configured into over two billion standard configurations that can be assembled to order and shipped within a few days. The A12 shares many of the same construction features and options with its bigger counterparts. The A12 has been tested to 20 million maintenance-free duty cycles. Ball bearings and a one piece, heat treated alloy steel pinion shaft complete the rugged, flexible dual rack construction of this proven workhorse.

Specifications:

• 2-Position Rotary Actuator
• Bore Size = 5/8"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .375" dia., Options: .250" dia., D .375" dia., & HS .375" I.D.
• Torque at 80 psi = 24 in-lbs.
• Ball Bearing Ratings = Radial: 305 lbs., Axial: 76 lbs.
• Port Size = 10-32 or 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Hollow Shaft
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A12 Rotary Actuator Part Numberpage for detailed configuration and option information.

Looking for the 3-Position version, see A12 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X1 Indexing Actuator.

For increased torque output, consider the A2 Rotary Actuator.

Compare All Dual Rack Tie Rod Rotary Actuators

A2 Rotary Actuator

Overview

The A2 incorporates all the design features that have made our 1 to 2-inch bore actuator line the standard in the industry for reliability and configurability. Floating pistons and a precision ground rack riding in replaceable sintered bronze bearings provide enhanced durability. The one piece, heat treated alloy steel pinion shaft is supported by large sealed ball bearings and it can be customized to suit your load. 

Specifications:

• Bore Size = 1"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .500" dia., Options: D .500" dia. & HS .375" I.D. dia.
• Torque at 80 psi = 39 in-lbs.
• Ball Bearing Ratings = Radial: 1,030 lbs., Axial: 257 lbs.
• Port Size = 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A2 Rotary Actuator Part Number page for detailed configuration and option information.

Looking for a three-position version, see A22 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X2 Indexing Actuator.

For double the output torque and zero backlash, consider our Dual Rack A22 Rotary Actuator.

Compare All Single Rack Tie Rod Pneumatic Rotary Actuators

A22 Rotary Actuator

Overview

The A22 rotary actuator can be configured into over two billion standard configurations that can be assembled to order and shipped within a few days. It shares many of the same construction features and options with its bigger counterparts. Its dual rack construction allows for expanded options combination flexibility. Ball bearings and a one-piece, heat-treated alloy steel pinion shaft make this rugged, flexible actuator one of the favorites. 

Specifications:

• 2-Position Rotary Actuator
• Bore Size = 1"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .500" dia., Options: D .500" dia. & HS .375" I.D.
• Torque at 80 psi = 78 in-lbs.
• Ball Bearing Ratings = Radial: 1,030 lbs., Axial: 257 lbs.
• Port Size = 1/8 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Washdown Protection
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A22 Rotary Actuator Part Number page for detailed configuration and option information.

Looking for the 3-Position version, see A22 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X2 Indexing Actuator.

For increased torque output, consider the A3 Rotary Actuator.

Compare All Dual Rack Tie Rod Rotary Actuators

A3 Rotary Actuator

Overview

The A3 incorporates all the design features that have made our 1 to 2-inch bore actuator line a standard in the industry for reliability and configurability. Floating pistons and a precision ground rack riding in replaceable sintered bronze bearings provide enhanced durability. The one piece, heat treated alloy steel pinion shaft is supported by large sealed ball bearings and it can be customized to suit your load. 

Specifications:

• Bore Size = 1 3/8"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .750" dia., Options: D .750" dia., HS .750" I.D., & HS .625" I.D.
• Torque at 80 psi = 119 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

 See the A3 Rotary Actuator Part Number page for detailed configuration and option information.

Looking for the three-position version, see A32 3-Position Actuator.

If you need precise unidirectional sequential steps, jump to X3 Indexing Actuator.

For double the output torque and zero backlash, consider our Dual Rack A32 Rotary Actuator.

Compare All Single Rack Tie Rod Rotary Actuators

A32 Rotary Actuator

Overview

The A32 can be configured into over two billion standard configurations that can be assembled to order and shipped within a few days. It shares many of the same construction features and options with its bigger counterpart, the A42. Its dual rack construction allows for expanded flexibility of options combination. Ball bearings and a one-piece, heat-treated alloy steel pinion shaft make this rugged, versatile actuator an excellent choice for the most demanding applications.

Specifications:

• 2-Position Rotary Actuator
• Bore Size = 1 3/8"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .750" dia., Options: D .750" dia., HS .750" I.D., & HS .625" I.D.
• Torque at 80 psi = 238 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A32 Rotary Actuator Part Number page for detailed configuration and option information.

Looking for a 3-Position version, see A32 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X3 Indexing Actuator.

For increased torque output, consider the A4 Rotary Actuator.

Compare All Dual Rack Tie Rod Rotary Actuators

A4 Rotary Actuator

Overview

The A4 incorporates all the design features that have made our 1 to 2-inch bore actuator line the standard in the industry for reliability and configurability. Floating pistons and a precision ground rack riding in replaceable sintered bronze bearings provide enhanced durability. The one piece, heat treated alloy steel pinion shaft is supported by large sealed ball bearings and it can be customized to suit your load. 

Specifications:

• Bore Size = 2"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: .1.000" dia. or 1.125" dia., Options: D 1.000", dia., D 1.125" dia., & HS .750" I.D.
• Torque at 80 psi = 277 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A4 Rotary Actuator Part Numberpage for detailed configuration and option information.

Looking for the three-position version, see A42 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X4 Indexing Actuator.

For double the output torque and zero backlash, consider our Dual Rack A42 Rotary Actuator.

Compare All Single Rack Tie Rod Rotary Actuators

A42 3-Position Rotary Actuator

Overview

With over 30 times more torque capacity than our A032 3-Position Actuator and billions of standard possible configurations, our A42 three-position actuator has overall dimensions that are similar to those of its two-position counterpart, the A42 Rotary Actuator. Output torque is that of a single rack unit but it can rotate to any of its 3 positions in any sequence by simply activating the proper directional control valve.

Specifications:

• 3-Position Rotary Actuator
• Bore Size = 2"
• Standard Rotations = From 30 to 730 degrees toal
• Shaft Sizes = Standard: 1.000" dia. or 1.125" dia., Options: D 1.000" dia., D 1.125" dia., & HS .750" I.D.
• Torque at 80 psi = 277 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A42 3-Position Rotary Actuator Part Number page for detailed configuration and option information.

But if you're looking for precise unidirectional sequential steps, consider our X4 Indexing Actuator.

Compare All 3-Position Rotary Actuators

A42 Rotary Actuator

Overview

With over 60 times more torque capacity than our A032 Rotary Actuator, the A42 is our largest rotary actuator. Its tie rod construction provides for a virtually unlimited number of possible combinations of standard, readily available options that could be installed either on the top or bottom cylinders as needed. With oversized ball bearings and a one-piece, heat-treated alloy steel pinion shaft, this extremely rugged, versatile actuator is an excellent choice for demanding medium to large applications.

Specifications:

• 2-Position Rotary Actuator
• Bore Size = 2"
• Standard Rotations = 15 Angles from 30 to 730 degrees
• Shaft Sizes = Standard: 1.000" dia. or 1.125" dia., Options: D 1.000" dia., D 1.125" dia., & HS .750" I.D.
• Torque at 80 psi = 554 in-lbs.
• Ball Bearing Ratings = Radial: 2,020 lbs., Axial: 500 lbs.
• Port Size = 1/4 NPT
• Available Options:
  • Adjustable Rotation
  • Cushions
  • Double Ended Shafts
  • Flow Controls
  • Heavy Duty (Aluminum Cylinders, Option A or Steel Cylinders, Option K)
  • Hollow Shaft
  • Washdown Protection
  • Mount Plates
  • Magnetic Switches Installed & Tested Prior To Shipping
  • Bumpers
  • Hydraulic Service Seals
  • Fluorocarbon Seals
  • Fluorocarbon Hydraulic Service Seals

See the A42 Rotary Actuator Part Number page for detailed configuration and option information.

Looking for the 3-Position version, see A42 3-Position Rotary Actuator.

If you need precise unidirectional sequential steps, jump to X4 Indexing Actuator.

Compare All Dual Rack Tie Rod Rotary Actuators