Product Line Swing Clamps
Single Rack Indexing Actuators
Request CAD Distributors Contact Us

Single Rack Indexing Actuators

Rotomation’s single rack indexing actuators are fully rebuildable and designed for general applications. Specific characteristics and features of each series:

 SeriesStandard
Rotations*1		Shaft SizesTorque
(at 60 psi)		Ball Bearing
Ratings		Port SizeAvailable
Options
X1 Indexing ActuatorX1From 12 deg.
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
0.3750" dia.		9 in-lbRadial: 305 lb
Axial: 76 lb		10-32
or 1/8 NPT		All below,
except 'HD'
and limited
mag switch type*5
X2 Indexing ActuatorX2From 12 deg.
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
0.5000" dia.		29 in-lbRadial: 612 lb
Axial: 20 lb*4		1/8 NPTAll below,
except 'J'
X3 Indexing ActuatorX3From 12 deg.*2
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
0.7500" dia.		89 in-lbRadial: 1,030 lb
Axial: 257 lb		1/4 NPTAll below
X4 Indexing ActuatorX4From 12 deg.*2
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
1.0000" dia.		208 in-lbRadial: 1,160 lb
Axial: 290 lb		1/4 NPTAll below

Notes:
1. All information in this table is for comparison purposes only. For ratings, please
visit specific product pages.
2. Not all options can be combined.
3. Cushion on drive not effective without friction acting on load or shaft.

*1Or combination of angles
adding up to 360 degrees.
*212 deg. recommended
for very light loads only.
*3Single or double ended.
*4Thrust inward only (push shaft).
*5Reed switches not available.

Options Legend:

C:
F:
HD:
J:
MP:
MS:
Q:
T:
V:
VT:

Cushions (see note #3 above)
Flow controls (integrtd.)
Heavy duty construction
Washdown protection
Mount plates
Magnetic switches
Bumper (reset only)
Hydraulic duty seals
High temperature seals
Combination seals