-
Rotary
Rotary ActuatorsCompactA032Torque: 9 in-lb*
Shaft: 1/4" or 3/8"
DiameterAL75Torque: 7-14 in-lb*
Shaft: 1/4"
DiameterA752Torque: 35 in-lb*
Shaft: 3/8"
DiameterSingle Rack Tie-RodA01Torque: 6 in-lb*
Shaft: 3/16" or 1/4"
DiameterA1Torque: 12 in-lb*
Shaft: 1/4" or 3/8"
DiameterA2Torque: 39 in-lb*
Shaft: 1/2"
DiameterA3Torque: 119 in-lb*
Shaft: 3/4"
DiameterA4Torque: 277 in-lb*
Shaft: 1" or 1 1/8"
DiameterDual Rack Tie-RodA12Torque: 24 in-lb*
Shaft: 1/4" or 3/8"
DiameterA22Torque: 78 in-lb*
Shaft: 1/2"
DiameterA32Torque: 238 in-lb*
Shaft: 3/4"
DiameterA42Torque: 545 in-lb*
Shaft: 1" or 1 1/8"
Diameter -
Multi-Position
Multi PositionThree Position ActuatorsA032Torque: 6 in-lb*
Shaft: 1/4" or 3/8"
DiameterA12Torque: 12 in-lb
Shaft: 3/8"
DiameterA22Torque: 39 in-lb*
Shaft: 1/2"
DiameterA32Torque: 119 in-lb*
Shaft: 3/4"
DiameterA42Torque: 277 in-lb*
Shaft 1 or 1 1/8"
Diameter4 or 5 Position ActuatorsFour or Five PositionTorque: 12-277 in-lb*
Shaft: 3/8"-1 1/8"
Diameter -
Indexing
Indexing ActuatorsSingle RackX1Torque: 9 in-lb*
Shaft: 3/8*
DiameterX2Torque: 29 in-lb*
Shaft: 1/2"
DiameterX3Torque: 89 in-lb*
Shaft: 3/4"
DiameterX4Torque: 208 in-lb*
Shaft: 1"
Diameter -
Stepping
Stepping ActuatorsSingle RackS1Torque: 12 in-lb*
Shaft: 3/8"
DiameterS2Torque: 39 in-lb*
Shaft: 1/2"
DiameterS3Torque: 119 in-lb*
Shaft: 3/4"
DiameterS4Torque: 277 in-lb*
Shaft: 1"
Diameter - Pick and Place
-
Nitpicker
Nitpicker ActuatorsSingle RackPX2Torque: 39 in-lb*
Shaft: 1"
Diameter -
Shaft Mounting Adapters
4 and 5 Position Actuators
Overview
With internal stops and one or two sets of auxiliary cylinders used for the two or three intermediate positions, respectively, our four and five-position actuators are built to resemble their two-position counterparts, except for the external auxiliary cylinders that add to the overall length of the unit.
Available in all our main actuator sizes, with the same lead time our regular rotary actuators, these actuators offer extreme configurability and reliable, repeatable positioning at a cost much lower than a servo motor system but their positions are not programmable. Like our three-position actuators, the output torque on these units is that of a single rack unit but they can rotate to any of its 4 or 5 positions in any sequence from any existing position by simply activating the proper directional control valve configuration.