-
Rotary Rotary ActuatorsCompactA032*80psi
Torque: 9 in-lb*
Shaft: 1/4" or 3/8"
DiameterAL75*80psi
Torque: 7-14 in-lb*
Shaft: 1/4"
DiameterA752*80psi
Torque: 35 in-lb*
Shaft: 3/8"
DiameterSingle Rack Tie-RodA01*80psi
Torque: 6 in-lb*
Shaft: 3/16" or 1/4"
DiameterA1*80psi
Torque: 12 in-lb*
Shaft: 1/4" or 3/8"
DiameterA2*80psi
Torque: 39 in-lb*
Shaft: 1/2"
DiameterA3*80psi
Torque: 119 in-lb*
Shaft: 3/4"
DiameterA4*80psi
Torque: 277 in-lb*
Shaft: 1" or 1 1/8"
DiameterDual Rack Tie-RodA12*80psi
Torque: 24 in-lb*
Shaft: 1/4" or 3/8"
DiameterA22*80psi
Torque: 78 in-lb*
Shaft: 1/2"
DiameterA32*80psi
Torque: 238 in-lb*
Shaft: 3/4"
DiameterA42*80psi
Torque: 545 in-lb*
Shaft: 1" or 1 1/8"
Diameter -
Multi-Position Multi PositionThree Position ActuatorsA032*80psi
Torque: 6 in-lb*
Shaft: 1/4" or 3/8"
DiameterA12*80psi
Torque: 12 in-lb
Shaft: 3/8"
DiameterA22*80psi
Torque: 39 in-lb*
Shaft: 1/2"
DiameterA32*80psi
Torque: 119 in-lb*
Shaft: 3/4"
DiameterA42*80psi
Torque: 277 in-lb*
Shaft 1 or 1 1/8"
Diameter4 or 5 Position ActuatorsFour or Five Position*80psi
Torque: 12-277 in-lb*
Shaft: 3/8"-1 1/8"
Diameter -
Indexing Indexing ActuatorsSingle RackX1*60psi
Torque: 9 in-lb*
Shaft: 3/8*
DiameterX2*60psi
Torque: 29 in-lb*
Shaft: 1/2"
DiameterX3*60psi
Torque: 89 in-lb*
Shaft: 3/4"
DiameterX4*60psi
Torque: 208 in-lb*
Shaft: 1"
Diameter -
Stepping Stepping ActuatorsSingle RackS1*80psi
Torque: 12 in-lb*
Shaft: 3/8"
DiameterS2*80psi
Torque: 39 in-lb*
Shaft: 1/2"
DiameterS3*80psi
Torque: 119 in-lb*
Shaft: 3/4"
DiameterS4*80psi
Torque: 277 in-lb*
Shaft: 1"
Diameter -
Pick and Place -
Nitpicker Nitpicker ActuatorsSingle RackPX2*80psi
Torque: 39 in-lb*
Shaft: 1"
Diameter -
Shaft Mounting Adapters
Protection Options
Washdown Protection
Our washdown protection option for actuators can be used in applications where water ingress protection, corrosion resistance, and leak contamination prevention are paramount. Rotomation also offers fluoroelastomer (FKM) seals for washing down with high-temperature caustic cleaning solutions. Shaft seals are built into the body or integral cover plates, cylinders are sealed by O-rings, and assembly threads are sealed. We use stainless shafts with anodized body and end caps. Also available are hard chrome-plated shafts and electroless nickel-plated body and end caps. See diagram.
Want more information?
Stainless Steel
We also provide stainless steel actuators with special PTFE and/or fluoroelastomer seals to prevent the entry of corrosive materials and preserve piston seals and vital lubrication.
Special stainless steel A42 rotary actuator. Mouse over the image to see the standard actuator with aluminum parts.
A long-stroke PA2.
Note the easily cleaned, uniform finish. The reliability and durability of these units largely eliminate the remove-and-replace production interruptions needed for units with less chemical resistance. We can produce just about any of our actuators in a suitable stainless alloy upon request. When nothing else will hold up, your customers will save money going with stainless steel.
Solutions That Fit Your Specific Needs
Rotomation offers extreme flexibility in options for you to configure your actuator to suit your needs exactly, rather than compromising your design to accommodate a one-size-fits-all actuator. Many times a simple modification to the shaft size, projection, or machined features such as keyways, flats, thru holes, etc., can improve your product and reduce cost. Or, you might need the actuator’s main body and end caps to be made of an alternative material like stainless steel or plastic, instead of the standard anodized aluminum alloy. A custom mounting hole pattern might make our actuator drop into your current setup. Rotomation understands your needs and is dedicated to providing solutions that allow you to optimize your design.