Single Rack Pick & Place Actuators

Rotomation's single rack pick & place actuators are designed for general applications where reliability and durability are important and where a small amount of lash is tolerable. Specific characteristics and features of each series under our Single Rack Pick & Place Actuator product category are shown below.

	Series	Standard Rotations	Rod Sizes	Torque (at 80 psi)	Force (at 80 psi)	Port Size	Available Options
	PA01	15 angles, from 30 to 730°^*1	Solid^*3: 0.375" dia.	4.6 in-lb @ extended, 5.3 in-lb @ retracted	Ext.: 25 lb Ret.: 15 lb	10-32 UNF	All below, except 'J'
	PA2	15 angles, from 30 to 730°^*2	Solid^*4: 1.000" dia.	24 in-lb @ extended, 34 in-lb @ retracted	Ext.: 118 lb Ret.: 56 lb	1/8 NPT	All below^*5
	PA3	15 angles, from 30 to 730°^*2	Solid^*4: 1.000" dia.	104 in-lb @ extended, 114 in-lb @ retracted	Ext.: 118 lb Ret.: 56 lb	1/4 NPT	All below^*5
Notes: 1. All information in this table is for comparison purposes only. For ratings, please visit specific product pages. 2. Not all options can be combined.					^1Special rotations up to 730° available. ^2Special rotations up to 1,080° available. ^3Plain or with standard keyway (to use with SMA). ^4With flats and 3/8-16 UNC thru hole or with standard keyway (to use with SMA). ^*5Reed switches also available.
					Options Legend:
					A: C: F: J: MP: MS: Q: T: V: VT:	Adjustable rotation Cushions (integrated) Flow controls (integrtd.) Washdown protection Mount plates Magnetic switches Bumpers (internal) Hydraulic duty seals High temperature seals Combination seals