PA22 Pick & Place Actuator

PA22 pick place actuator
PA22 Dual Rack Pick & Place Actuator


The PA22 pick & place actuator features a rotary section similar to our A22 Rotary Actuator coupled with a linear cylinder to produce independently controlled linear and rotary motion of the rod. With standard linear strokes up to 12 inches, optional rod ends, and tie rod construction, the PA22 is an extremely versatile actuator, capable of handling significant loads in any desired sequence.


  • Bore Size = 1 3/8"
  • Standard Rotations = 15 Angles from 30 to 730 degrees
  • Shaft Sizes = Standard: 1.000" dia., Options: None
  • Torque at 80 psi = 63 in-lbs. @ extended, 73 in-lbs. @ retracted
  • Linear Force at 80 psi = Extended: 118 lbs., Retract: 56 lbs.
  • Port Size = 1/8 NPT
  • Available Options:
    • Adjustable Rotation
    • Cushions
    • Flow Controls
    • Washdown Protection
    • Mount Plates
    • Magnetic Switches (Installed & Tested Prior To Shipping)
    • Bumpers
    • Hydraulic Service Seals
    • Fluorocarbon Seals
    • Fluorocarbon Hydraulic Service Seals

See the PA22 Pick & Place Actuator Part Number page for detailed configuration and option information.

For increased output torque, consider our PA3 Pick & Place Actuator. Multi-position (3, 4, or 5 positions) rotary sections also possible1.

Compare All Dual Rack Pick & Place Actuators



  • Independently controlled combined rotary and linear motion
  • Extremely configurable to fit your specific needs
  • Available also with 3, 4, or 5-position rotary section1
  • Various rotation angles and rotary options like our A22
  • Optional magnetic switches for linear section also
  • Select between standard or keyed, 1" diameter rod ends
  • Optional 'B' rod end (keyed) compatible with SMA-10 adapter

1Not shown on this page, contact factory for more information.

Use our online configurator for the PA22 actuator.

Find a distributor for Rotomation in your area.

Have questions?  Call us at 386-676-6377 or click.