PA32 Pick & Place Actuator

PA32 pick place actuator
PA32 Dual Rack Pick & Place Actuator


The PA32 pick & place actuator features a rotary section similar to our A32 Rotary Actuator coupled with a linear cylinder to produce independently controlled linear and rotary motion of the rod. With standard linear strokes up to 12 inches, optional rod ends, tie rod construction, and over 42 times more torque capacity than our PA01 Pick & Place Actuator, the PA32 is reliable and capable of handling large loads in any desired sequence. Stepping or multi-position (3, 4, or 5 positions) rotary sections also possible1.


  • Bore Size = 1 3/8"
  • Standard Rotations = 15 Angles from 30 to 730 degrees
  • Shaft Sizes = Standard: 1.000" dia., Options: None
  • Torque at 80 psi = 192 in-lbs. @ extended, 221 in-lbs. @ retracted
  • Linear Force 80 psi = Extended: 118 lbs., Retract: 56 lbs.
  • Port Size = 1/4 NPT
  • Available Options:
    • Adjustable Rotation
    • Cushions
    • Flow Controls
    • Washdown Protection
    • Mount Plates
    • Magnetic Switches (Installed & Tested Prior To Shipping)
    • Bumpers
    • Hydraulic Service Seals
    • Fluorocarbon Seals
    • Fluorocarbon Hydraulic Service Seals

See the PA32 Pick & Place Actuator Part Number page for detailed configuration and option information.

Compare All Dual Rack Pick & Place Actuators



  • Independently-controlled combined rotary and linear motion
  • Extremely configurable to fit your specific needs
  • Available also with stepping or multi-position rotary sections1
  • Various rotation angles and rotary options like our A32
  • Optional magnetic switches for linear section also
  • Select between standard or keyed, 1" diameter rod ends
  • Optional 'B' rod end (keyed) compatible with SMA-10 adapter

1Not shown on this page, contact factory for more information.

Use our online configurator for the PA32 actuator.

Find a distributor for Rotomation in your area.

Have questions?  Call us at 386-676-6377 or click.