PA2 Pick & Place Actuator

PA2 pick place actuator
PA2 Single Rack Pick & Place Actuator


The PA2 Pick & Place actuator features a rotary section similar to our A2 Rotary Actuator coupled with a linear cylinder to produce independently controlled linear and rotary motion of the rod. With standard linear strokes up to 12 inches, optional rod ends, and tie rod construction, the PA2 is an extremely versatile actuator, capable of handling significant loads in any desired sequence.


  • Bore Size = 1"
  • Standard Rotations = 15 Angles from 30 to 730 degrees
  • Shaft Sizes = Standard: 1.000" dia., Options: None
  • Torque at 80 psi = 24 in-lbs. @ extended, 34 in-lbs. @ retracted
  • Linear Force at 80 psi = Extended: 118 lbs., Retract: 56 lbs.
  • Port Size = 1/8 NPT
  • Available Options:
    • Adjustable Rotation
    • Cushions
    • Flow Controls
    • Washdown Protection
    • Mount Plates
    • Magnetic Switches (Installed & Tested Prior To Shipping)
    • Bumpers
    • Hydraulic Service Seals
    • Fluorocarbon Seals
    • Fluorocarbon Hydraulic Service Seals

See the PA2 Pick & Place Actuator Part Number page for detailed configuration and option information.

For double the output torque and half the lash, consider our PA22 Pick & Place Actuator.

Compare All Pick & Place Actuators



  • Independently-controlled combined rotary and linear motion
  • Extremely configurable to fit your specific needs
  • Various rotation angles and rotary options like our A2
  • Optional magnetic switches for linear section also
  • Select between standard or keyed, 1" diameter rod ends
  • Optional 'B' rod end (keyed) compatible with SMA-10 adapter

Use our online configurator for the PA2 actuator.

Find a distributor for Rotomation in your area.

Have questions?  Call us at 386-676-6377 or click.