Menu

Single and Dual Rack Nitpicker Actuators


Rotomation's nitpicker actuators are fully rebuildable and designed for general applications requiring independently-controlled combined linear and indexing motion on a single unit. Specific characteristics and features of each series under our Nitpicker Actuators product category are shown below.

  Series Standard
Rotations*1
Rod Size Torque
(at 60 psi)
Force (at 60 psi) Rotation
Accuracy
Working
Pressure (psi)
PX2 Nitpicker Actuator
Single Rack

PX2

From 12 deg.
(30 steps/rev.)
to 360 deg.
(1 step/rev.)
Solid*2
1.000" dia.
18 in-lb @
extended,
25 in-lb @
retracted
Ext.: 89 lb
Ret.: 42 lb
±2.0° 150/250 index/linear
maximum,
respectively
PX22 Nitpicker Actuator
Dual Rack

PX22

From 12 deg.
(30 steps/rev.)
to 360 deg.
(1 step/rev.)
Solid*2
1.000" dia.
47 in-lb @
extended,
55 in-lb @
retracted
Ext.: 89 lb
Ret.: 42 lb
±0.2° 75/250 index/linear
maximum,
respectively
Notes:
1. All information in this table is for comparison purposes only. For ratings, please
    visit specific product pages.

*1Or combination of angles
adding up to 360 degrees.
*2With flats and 3/8-16 UNC
thru hole or with standard
keyway (to use with SMA).

          Options Available:  
          -
-
-
-
-
-
-
-
-
-

Cushions (integrated)
Flow controls (integrtd.)
Keyed rod for SMA
Auxiliary shaft (1/2" dia.)
Mount plates
Magnetic switches
Bumper (reset only)
Hydraulic duty seals
High temperature seals
Combination seals

Delivering engineered solutions since 1967.
Rotomation is dedicated to providing reliable, extremely configurable, and fully rebuildable pneumatic actuators for automation. Custom and special actuators are our specialty.
Made in USA!

Call Us: (386) 676-6377
¡Se Habla Español!
Email Us: sales@rotomation.com
11 Sunshine Blvd, Ormond Beach, FL 32174